Affordable Mobile Small Engine Tune Ups in Denver

Searching for Affordable Mobile Small Engine Tune Ups in Denver? Call Us: 720-704-1267 Today!

How-To Properly Start Your ARIENS Snowblower & Engine Controls Explained!

Understanding Your ARIENS Snowblower Controls

Snowblowers can be powerful tools when it comes to clearing snow from your driveways and sidewalks. However, before you can get started, it’s important to understand the engine controls of your ARIENS snowblower. Here’s a breakdown of the controls and how to properly start your machine.

The Choke, Primer, and Fuel Shutoff Controls

The choke control on your ARIENS snowblower regulates the air-to-fuel ratio necessary for starting. It can usually be found near the engine’s carburetor. Before starting the machine, make sure the choke lever is in the “Closed” position. Next, locate the primer bulb, usually positioned on top of the engine, and press it three to four times to ensure fuel reaches the carburetor. Lastly, locate the fuel shutoff valve, typically located on the fuel line near the engine. Turn it to the “On” position to allow fuel to flow to the engine.

The Throttle Control and Electric Starter

The throttle control on your ARIENS snowblower allows you to adjust the engine’s speed. Before starting, set the throttle to the “Fast” position to ensure optimal performance during operation. Some models may also have an electric starter. To use it, connect the power cord to a grounded electrical outlet and simply push the starter button. This eliminates the need for pulling a recoil starter cord, making the starting process easier and more convenient.

Safety Features and Precautions

ARIENS snowblowers are designed with safety in mind. To prevent accidental starting, ensure that the ignition key is removed or in the “Off” position before attempting any maintenance or adjustments. Additionally, always conduct a quick inspection before starting. Check for any loose or damaged parts and make sure the area you’ll be operating the snowblower in is clear of objects that could become projectiles during use.

Starting Your ARIENS Snowblower

Once you understand the engine controls on your ARIENS snowblower, starting it becomes a straightforward process. Here’s a step-by-step guide to getting your machine up and running.

Prep Your Snowblower

Before starting, ensure that your snowblower is on a flat surface and the fuel tank is filled with fresh gasoline mixed with the appropriate amount of oil. Look for the fuel and oil recommendations in the operator’s manual to ensure the correct mixture. It’s also important to check the oil level and refill if necessary. Sufficient oil is vital for proper engine lubrication.

Engage the Cold Start

If the temperature is below freezing, engage the cold start feature on your ARIENS snowblower. This feature provides a richer fuel mixture for easier starting in colder conditions. Follow the instructions in your operator’s manual to engage the cold start lever, usually found near the choke control.

Prime and Start

With the choke lever in the “Closed” position and the fuel shutoff valve turned on, prime the engine by pressing the primer bulb three to four times. After priming, shift the throttle to the “Fast” position and turn the ignition key to the “Start” position. If your snowblower has an electric starter, simply press the starter button. If it has a recoil starter cord, give it a firm pull. The engine should now start. Let it warm up for a few minutes before engaging the auger and moving forward.

Call to Action

Winter weather can be unpredictable, and having a reliable snowblower like an ARIENS can make snow removal a breeze. By understanding the engine controls and following the proper starting procedure, you can ensure that your ARIENS snowblower starts effortlessly and delivers optimum performance all winter long. So, get familiar with your machine’s controls, prepare it for action, and confidently take on the snow. Stay safe, stay warm, and enjoy the winter wonderland without worrying about shoveling!