Reliable Mobile Snow Thrower Repair Denver

Looking for Reliable mobile snow thrower repair Denver? Call Us: 720-704-1267 Now!

Snow Blower Won’t Start – Fix

Troubleshooting the Common Issues

Is your snow blower refusing to start just when you need it the most? Don’t worry, we’ve got you covered! Before contacting a professional or giving up on your machine, try these troubleshooting steps to get your snow blower up and running in no time.

1.1 Check the Fuel and Oil Levels

One of the most common reasons why a snow blower won’t start is insufficient fuel or oil levels. Begin by ensuring that your snow blower has enough gasoline and oil. Start by adding fresh fuel and checking the oil dipstick for proper levels. If needed, top up both fuel and oil and then attempt to start the blower again.

1.2 Examine the Spark Plug

A worn-out or faulty spark plug can hinder the snow blower’s ignition. Carefully remove the spark plug wire, and using a spark plug wrench, take out the spark plug. Inspect it for any carbon build-up, damage, or wear and tear. If necessary, clean the spark plug or replace it entirely with a new one.

Test the Ignition Switch and Safety Features

Ensure that the ignition switch on your snow blower is set to the “On” position. Also, take a moment to verify if any of the safety features, such as the chute or auger safety switch, are engaged or blocking the blower from starting. Some safety mechanisms are designed to prevent engine ignition when certain parts are not in the correct position.

Addressing Fuel System Issues

If your snow blower still refuses to start, it may indicate a problem with the fuel system. Here are a few steps to address potential fuel system issues that could be preventing your snow blower from starting.

2.1 Clean or Replace the Carburetor

Over time, the carburetor in your snow blower can become clogged with old fuel or debris, causing starting problems. Try cleaning the carburetor using a carburetor cleaner or, if necessary, replace it entirely. Refer to your snow blower’s manual for specific instructions on cleaning or replacing the carburetor.

2.2 Inspect the Fuel Lines and Filter

Examine the fuel lines for signs of damage or blockage. Sometimes, debris can accumulate in the fuel tank or clog the fuel filter, restricting fuel flow. If needed, replace any damaged fuel lines or clean the fuel filter to ensure adequate fuel supply to the engine.

2.3 Drain Old Fuel and Refill

If you left old fuel in your snow blower’s tank during its off-season, it might have deteriorated and become ineffective. Drain the old fuel completely and refill it with fresh gasoline mixed with the correct oil-to-fuel ratio recommended by the manufacturer. Stale fuel can prevent the snow blower from starting or cause it to run erratically.

Checking the Electrical System

If the above steps haven’t resolved the issue, it’s time to inspect the snow blower’s electrical system, which could be another possible cause of starting problems.

3.1 Test the Starter Motor

The starter motor is responsible for initiating the engine’s rotation. If it fails, your snow blower won’t start. Check the connections between the starter motor and the battery to ensure they are secure. If the connections are fine, use a multimeter to test the starter motor’s voltage. If it reads below the recommended value, consider replacing the starter motor.

3.2 Inspect the Wiring and Safety Switches

A loose or damaged wire may prevent the snow blower from starting. Check the wiring harness and look for any disconnected or frayed wires. Additionally, ensure that all safety switches and controls are functioning correctly, as a faulty switch can also hinder the starting process.

3.3 Replace the Ignition Coil

The ignition coil is responsible for generating the electrical spark needed to ignite the fuel mixture. If the coil is faulty, the snow blower won’t start. Consult your snow blower’s manual for information on how to test the ignition coil using a multimeter. If it fails the test, replacing the ignition coil should solve the problem.

Call to Action:

Follow these troubleshooting steps to get your snow blower up and running. However, if the issue persists or if you’re not comfortable performing these tasks yourself, it’s always best to seek assistance from a professional snow blower technician. Enjoy a worry-free winter season with a well-functioning snow blower!